LTS / Hikvision IP Portal & SADP Tool Ports

Post Reply
GiGaBiTe
Site Admin
Posts: 44
Joined: Wed Jan 29, 2020 2:38 am

LTS / Hikvision IP Portal & SADP Tool Ports

Post by GiGaBiTe »

Neither Hikvision or LTS seem to have an easily accessible list of ports required to remotely configure their cameras using the IP Portal (LTS) or SADP Tool (Hikvision). Here's a list of ports I found using iptraf-ng on Linux.

8000 (TCP)
554 (TCP)
10554 (TCP)
62000-64000 (UDP)
37020 (UDP)
5353 (UDP)

The last two are required for the cameras to show up in the IP Portal / SADP tools. Windows Firewall generally will allow these if you choose to allow the application when it first starts, but running the programs via WINE under Linux require you to manually unblock the ports in the firewall configurator.

Post Reply