LTS / Hikvision IP Portal & SADP Tool Ports
Posted: Mon Mar 07, 2022 6:47 am
Neither Hikvision or LTS seem to have an easily accessible list of ports required to remotely configure their cameras using the IP Portal (LTS) or SADP Tool (Hikvision). Here's a list of ports I found using iptraf-ng on Linux.
8000 (TCP)
554 (TCP)
10554 (TCP)
62000-64000 (UDP)
37020 (UDP)
5353 (UDP)
The last two are required for the cameras to show up in the IP Portal / SADP tools. Windows Firewall generally will allow these if you choose to allow the application when it first starts, but running the programs via WINE under Linux require you to manually unblock the ports in the firewall configurator.
8000 (TCP)
554 (TCP)
10554 (TCP)
62000-64000 (UDP)
37020 (UDP)
5353 (UDP)
The last two are required for the cameras to show up in the IP Portal / SADP tools. Windows Firewall generally will allow these if you choose to allow the application when it first starts, but running the programs via WINE under Linux require you to manually unblock the ports in the firewall configurator.